• 2020 Western Star 4800SB with 380HP Detroit DD13
• New 4X4 Chemical/Oil tank.
• 1,450 lb.ft of torque
• Jake
• Fuller FRO-14210C 10 speed overdrive transmission
• Meritor MX-23-160R front drive axle
• Fabco TC-180 Transfer Case
• 21,500 lb front suspension
• Meritor RS-30-185 31,000 lb rear axle
• locking differential
• 4.56 ratio
• 30,000 lb rear suspension
• double frame
• front frame extension
• 177″ wheelbase
• 118″ CA with 100″ afterframe
• 100 gallon fuel tank
• 60 gallon hydraulic tank
• stainless steel tank straps
• Michelin 315 front tires and Micheline 11R22.5 16 ply rear tires
• steel wheels
• Galvanealed severe service cab
• heated power mirrors
• air drivers seat
• 2 man passenger seat
• AM/FM/WB Stereo

OIL TANK – MODIFIED ELLIPTICAL DESIGN

• Construction Large radii shell w/dished & flanged heads & double bottom for severe duty
• Non-code Tank is built to DOT-406 specifications, but not certified
• Capacity (2400) U.S. gallons, single compartment
• Tank heads (0.1644) inch 304-2B stainless steel
• Baffle (0.1644) inch 304-2B stainless steel
• Tank shell (0.1644) inch 304-2B stainless steel
• Double bottom Elliott design including (0.1644) inch full length double bottom
• Long sills Full length reinforced steel long sills
• Roll over protection Installed on top of the tank with a catwalk in-between
• Manway Top mounted manway equipped with a (10) inch vented fill lid
• Outlet TTMA approved sump assembly
• Ladder Steel access ladder with top service platform – street side front
• Fill Top fill only

TANK MOUNTING

• Spring tie downs Elliott heavy duty spring loaded “H” bracket design
• Fixed tie downs Twin bolt fixed position tie downs
• Separators Rubber composite sill between chassis frame rail and body long sills

REEL CABINET – HOSE REEL AND EQUIPMENT ENCLOSURE

• Construction Formed steel construction with integral drip ledge
• Rear access Rear aluminum flip-up style door w/gas charged assist springs, stainless
• steel hinges, multi-point latch, and weatherseal
• Interior lighting (12) VDC LED strip lights installed in hose reel area

STORAGE CABINETS

• Material All steel welded construction equipped with; stainless steel bolt-on hinges
• multi-point latches (keyed alike), and automotive weather seals
• Curb side (1) each, (36) in. L x (26) in. D x (24) in. H general storage.
• CABINET SIZES MAY VARY DUE TO INTERFERENCE WITH CHASSIS
• COMPONENTS (i.e.: AIR DRYER, DEF TANK, BATTERY BOX, etc.)

OIL SYSTEM

• Pump Power take-off driven Blackmer TXD1.5 pump
• Hose reel Hannay electric rewind hose reel with (100) feet of (1.00) inch oil hose
• Dispense nozzle (1.00) in. automatic nozzle with swivel
• Flow meter Flow meter with totalizer and reset function, registers up to 999 gallons
• Filter Oil filter assembly – appropriately sized for the required flow
• Hour meter Hour meter installed in chassis cab

12 VDC ELECTRICAL SYSTEM

• Body lighting LED clearance and STT lights conforming to FMVSS 108
• Back-up alarm (12) VDC back-up alarm

MISCELLANEOUS

• Mud flaps Heavy duty rubber
• Fire extinguisher (20) pound type ‘ABC’ fire extinguisher – shipped loose
• Rear bumper Rectangular tubing bumper

FINISH COATINGS

• Preparation All surfaces are mechanically cleaned and chemically washed
• Primer Body components are primed using PPG epoxy primer
• Finish paint Body components are finish painted using (2) coats of PPG baked on
  acrylic urethane
• Under coating Under body components are under coated

• Air Bags
• Air Conditioning